QS Motor QS138 70H mid-drive motor 3000 W
72 V, 52 N·m, IPM, IP67
Interior permanent-magnet mid-drive motor (IPM PMSM) from QS Motor for 72 V. Rated power is 3000 W and maximum torque 52 N·m according to the manufacturer's test. The motor has hall sensors and a temperature sensor (KTY83-122), is sealed to IP67 and is naturally cooled. The output shaft is splined (Ø20 mm, 6 keys) for a sprocket or belt pulley. The motor mounts with six M8 threads on a 131 mm bolt circle at both ends. The phase leads (16 mm²) have M6 lugs and run in an orange protective sleeve. The hall connector is a sealed 6-pin DJ7061Y-2.3 plug that mates the hall plug on the Fardriver ND-series harness. The controller must limit battery current to 150 A or less, for example a Fardriver ND72450 with an adjusted current limit. Sprockets and belt pulleys for the motor are sold separately. #SPECS Motor type: IPM PMSM with hall sensors Rated voltage: 72 V Rated power: 3000 W Maximum torque: 52 N·m Pole pairs: 5 Magnet height: 70 mm Temperature sensor: KTY83-122 Insulation class: F Ingress protection: IP67 Cooling: Natural Output shaft: Splined, Ø20 mm, 6 keys Mounting: 6 × M8 on a Ø131 mm bolt circle, both ends Length: 197.8 mm Phase leads: 16 mm², 16-6 lugs (M6) Hall connector: DJ7061Y-2.3-11, 6-pin, sealed Lead length: approx. 650 mm Battery current, max: 150 A Weight: 10.5 kg #SPECSEND
489,00 €
QS Motor QS120 70H mid-drive motor 2000 W
72 V, 6000 W max, 45 N·m, IP67
Permanent-magnet mid-drive motor (PMSM) from QS Motor for 72 V, with a 70 mm magnet height. Rated power is 2000 W and maximum power 6000 W. Maximum torque is 45 N·m according to the manufacturer's test. The motor has hall sensors and a temperature sensor (KTY83-122), is sealed to IP67 and is naturally cooled. The output shaft is splined (Ø20 mm, 6 keys) for a sprocket or belt pulley. The motor mounts with five M8 threads on a 131 mm bolt circle. The phase leads (8 mm²) have M6 lugs, and the hall connector is a sealed 6-pin DJ7061Y-2.3 plug that mates the hall plug on the Fardriver ND-series harness. The controller must limit battery current to 100 A and phase current to 300 A or less, for example a Fardriver ND72340 with an adjusted current limit. Sprockets and belt pulleys for the motor are sold separately. #SPECS Motor type: PMSM with hall sensors Rated voltage: 72 V Rated power: 2000 W Maximum power: 6000 W Rated speed: 2800 rpm Maximum torque: 45 N·m Magnet height: 70 mm Temperature sensor: KTY83-122 Insulation class: F Ingress protection: IP67 Cooling: Natural Output shaft: Splined, Ø20 mm, 6 keys Mounting: 5 × M8 on a Ø131 mm bolt circle Phase leads: 8 mm², 10-6 lugs (M6) Hall connector: DJ7061Y-2.3-11, 6-pin, sealed Lead length: approx. 680 mm Battery current, max: 100 A Phase current, max: 300 A Weight: 8.8 kg #SPECSEND
399,00 €
