Fardriver ND72450 motor controller 72 V
72 V, 200 A battery current, 450 A phase current
Programmable Fardriver motor controller for 72 V with sine-wave control (FOC). Battery current is 200 A and phase current up to 450 A. It suits, for example, the Hub motors 45H26 and 45H16 and the QS Motor QS138 (for the QS138, set the battery current to 150 A or less).
The controller has regenerative braking, three speed levels, boost, cruise and reverse. The housing is a plastic cover on a finned aluminium base. It is sealed to IP67. All signals run through a 30-pin harness with pre-fitted connectors.
Settings are made with the Fardriver USB programming kit (Windows) or the Fardriver Bluetooth dongle (phone app), sold separately.
#SPECS
Control: Sine wave (FOC)
Voltage: 72 V
Battery current, max: 200 A
Phase current, peak: 450 A
Regenerative braking: Yes
CAN bus: Yes, two bare wires (CAN H, CAN L)
Temperature sensor: Selectable: PTC-1000, KTY84-130, KTY83-122, NTC-10K, NTC-100K
Ingress protection: IP67
Mounting: 4 holes, Ø7.5 mm
Power terminals: 5 screw terminals (B+, B−, U, V, W)
Hall connector: DJ7061Y-2.3-21, 6-pin
Programming port: DJ7041B-2.8-11, 4-pin
Dimensions: 189 × 121 × 59.7 mm
#SPECSEND
