Thumb throttle with a hall sensor and a soft return spring, for a 22.2 mm handlebar. The throttle is powered with 5 V from the controller. The cable has three wires (red +5 V, white signal, black ground) and ends in a black 3-pin JST SM type connector (female). Neither the VOTOL EM-50-4 nor the Fardriver ND series has a matching connector as delivered: fit the connector your controller's throttle lead needs, or join the wires by colour as in the wiring diagram.
Key figures
- Type
- Hall thumb throttle
- Connector
- JST SM type, 3-pin, female
- Cable length
- 180 cm
- Handlebar diameter
- 22.2 mm
In the box
- Thumb throttle
Before installing
- Neither the VOTOL EM-50-4 nor the Fardriver ND series has a matching connector as delivered. Fit the connector the controller's throttle lead needs, or join the wires by colour.
- Electrical
- Sensor
- Hall sensor
- Supply
- From the controller's 5 V throttle output
- Mechanical
- Spring
- Soft
- Handlebar diameter
- 22.2 mm
- Cable length
- 180 cm
- Connections
- Connector
- JST SM type, 3-pin, female (black)
- Wires
- Red (+5 V), white (signal), black (ground)
We do our best to keep this information accurate, but accept no liability for any errors. Always check it against your product before connecting anything. Spotted something that doesn't look right? Email us at info@gbike.se and help us keep the documentation accurate and reliable.
Throttle plug
JST SM type, 3-pin, female
| Colour | Function |
|---|---|
| Red | +5 V from the controller |
| White | Throttle signal |
| Black | Ground |
3D view
A · mating faceB · wire sideA · Mating face
latch up
B · Wire side
latch up
Connecting to VOTOL EM-50-4
The controller's throttle wires sit in a 6-pin connector together with other wires. Connect by wire colour.
| Wire | Controller pin |
|---|---|
| Red, +5 V | J3-8Controller wire: pink |
| White, throttle signal | J3-6Controller wire: green |
| Black, ground | J3-7Controller wire: black |
Connecting to Fardriver ND72340, ND72450 and ND72680
Needs a new connector: the controller's branch uses a different plug type.
| Wire | Controller pin |
|---|---|
| Red, +5 V | J1-3Controller wire: red/white |
| White, throttle signal | J1-4Controller wire: green/white |
| Black, ground | J1-5Controller wire: black |
We do our best to keep this information accurate, but accept no liability for any errors. Always check it against your product before connecting anything. Spotted something that doesn't look right? Email us at info@gbike.se and help us keep the documentation accurate and reliable.
- Handlebar diameter
- 22.2 mm
We do our best to keep this information accurate, but accept no liability for any errors. Always check it against your product before connecting anything. Spotted something that doesn't look right? Email us at info@gbike.se and help us keep the documentation accurate and reliable.
Works with Hall thumb throttle
Controllers
Fardriver ND72450 motor controller 72 V
- Rated voltage: 72 V
- Battery current: 200 A
Needs a new connector
In stock
269 €Fardriver ND72340 motor controller 72 V
- Rated voltage: 72 V
- Battery current: 120 A
Needs a new connector
In stock
219 €VOTOL EM-50-4 motor controller 72 V
- Rated voltage: 72 V
- Battery current: 80 A
Needs a new connector. Ordered as part of GBIKE 1, we make sure it connects.
In stock
129 €Fardriver ND72680 motor controller 72 V
- Rated voltage: 72 V
- Battery current: 350 A
Needs a new connector
In stock
349 €
Other throttles
Show allFull twist throttle with voltmeter and ignition switch
- Cable length: 180 cm
- Handlebar diameter: 22.2 mm
In stock
17,90 €
Not sure what fits your build? Send us your motor and battery and we'll answer. info@gbike.se




